| Bahan | 100% Perawan Tungsten Carbide |
|---|---|
| Lapisan | AlTiN,TiAIN,NANO |
| Jenis | Standar |
| Diameter | 1-20MM |
| Panjang keseluruhan | 50-150mm, di bawah 330mm |
| Waktu pengiriman | 7-10 Hari |
|---|---|
| seruling | 1-8 |
| HRC | 45, 55, 60, 65 |
| Jenis | datar, hidung bola, radius sudut, aluminium |
| kemasan | 1 PCS dalam Tabung Plastik, 10 PCS Per Grup |
| Waktu pengiriman | 7-10 hari |
|---|---|
| Kelas | HRC45 / 50/60/70 |
| Bahan | 100% Virgin Tungsten Carbide |
| Formulir Pemotongan | Flat, Bola Hidung, Radius Pojok dll |
| Seruling | 2/3/4/6 |
| Diameter | 0,1-4mm |
|---|---|
| Mengetik | End Mill, Endmills |
| Jenis pengolahan | logam cutting tools |
| HRC | 45/55/60/65 |
| penggunaan | General High Speed Cutting |
| Waktu pengiriman | 7-15 hari |
|---|---|
| Bahan | 100% Tungsten carbide |
| Dilapisi | Altin, Tiain, Nano, dll. |
| Seruling | 2/3/5/6 |
| Panjang | 50-150mm |
| Bahan | wolfram karbida |
|---|---|
| Lapisan | Nano |
| Diameter | 1-20mm, 0,5-20mm |
| HRC | 45/55/60/65 HRC |
| Seruling | 1F / 2F / 3F / 4F / 6F dan dibuat oleh pelanggan |
| Diameter | 0.5mm-32mm, Disesuaikan |
|---|---|
| Panjang | 50mm-150mm, Disesuaikan |
| Nomor seruling | 2, 3, 4, 6 dll |
| HRC | 45, 50, 55, 65 |
| Lapisan | Nano, Tiain, Tisin dll. |
| Umurmu | Memotong PCB |
|---|---|
| Bahan | Karbit |
| Betis | 4 mm |
| Nomor seruling | 2 |
| Panjang | 50mm |
| Bahan | wolfram karbida |
|---|---|
| Lapisan | Non coating |
| Diameter betis | 3 - 20mm |
| Gigi | 1 gigi |
| Jenis Pabrik Akhir | Pemotong seruling akhir pabrik seruling tunggal |
| Nomor seruling | 4 |
|---|---|
| HRC | 45 |
| Diameter seruling | 0.5mm-25mm, Disesuaikan |
| Formulir Pemotongan | Pabrik ujung datar |
| Panjang | 50mm-150mm, Disesuaikan |
