| Bahan | Karbit |
|---|---|
| Lapisan | Altin/Tialn/Timah/Tisin/Nano |
| Jenis | End Mill, Square, 2 seruling meratakan end mill, hidung bola |
| Panjang keseluruhan | 50-150mm, 50-100,50 - 200 mm |
| Diameter | 1-20mm, 0,5-20mm, 3-20 pemotong pabrik akhir |
| Bahan | wolfram karbida |
|---|---|
| Lapisan | Non coating |
| Diameter betis | 3 - 20mm |
| Gigi | 1 gigi |
| Jenis Pabrik Akhir | Pemotong seruling akhir pabrik seruling tunggal |
| Aplikasi | Stainless Steel Cast Iron Allumimum Copper |
|---|---|
| Bahan | Karbit |
| penggunaan | Untuk memotong Aluminium, Kayu |
| Lapisan | Nano |
| Diameter | 1-20MM |
| Bahan | wolfram karbida |
|---|---|
| Lapisan | Nano |
| Diameter | 1-20mm, 0,5-20mm |
| HRC | 45/55/60/65 HRC |
| Seruling | 1F / 2F / 3F / 4F / 6F dan dibuat oleh pelanggan |
| Diameter | 0.5mm-32mm, Disesuaikan |
|---|---|
| Panjang | 50mm-150mm, Disesuaikan |
| Nomor seruling | 2, 3, 4, 6 dll |
| HRC | 45, 50, 55, 65 |
| Lapisan | Nano, Tiain, Tisin dll. |
| Bahan | 100% Bahan Baru |
|---|---|
| Lapisan | AlTiN, TiAIN, TiN |
| Mengetik | End Mill, Square, Alat Penggilingan Tungsten Carbide Untuk Baja |
| Diameter | 0,5-20mm |
| Panjang Keseluruhan | 50-150mm |
| Nomor seruling | 2, 3, 4, 5, 6 |
|---|---|
| Kemasan | 1 PCS dalam Tabung Plastik, 10 PCS Per Grup |
| Sampel | Bebas |
| Periode Produksi | 7-10 Hari |
| Formulir Pemotongan | Datar, Hidung Bola, Radius Sudut, Kasar |
| Diameter | 3.175mm 4mm 6mm |
|---|---|
| CED | 3.175mm / 4mm / 6mm |
| CEL | 12mm / 15mm / 17mm, dll |
| OVL | 38.5mm-60mm |
| Bahan | Karbit |
| Bahan | 100% Perawan Tungsten Carbide |
|---|---|
| Lapisan | AlTiN,TiAIN,NANO |
| Jenis | Standar |
| diameter | 1-20MM |
| Panjang keseluruhan | 50-150mm, di bawah 330mm |
| Benda kerja | HRC 45, 50, 60, 65 |
|---|---|
| Jenis Pelapisan | Tisin, Tialn, Altin, Ticn, Blue Nano |
| Formulir Pemotongan | Datar, Bola Hidung, Radius Sudut, Hidup seadanya |
| Seruling | 2, 3, 4, 5, 6 |
| Panjang Suling | 2.5mm-50mm, Disesuaikan |
